Nd: YAG Laser
Plate Beamsplitters
Hangata li-beamsplitters li aroloa ho latela kaho ea tsona: cube kapa poleiti.Li-plate beamsplitters li na le poleiti e tšesaane, e sephara ea khalase e koahetsoeng ka holim'a karolo ea pele ea substrate.Boholo ba li-plate beamsplitters li na le seaparo se khahlanong le ho bonahatsa sebakeng sa bobeli ho tlosa litšoantšo tse sa batleheng tsa Fresnel.Li-plate beamsplitters hangata li etselitsoe 45° AOI.Li-plate beamsplitters tse tloaelehileng li arola leseli la ketsahalo ka karo-karolelano e ikhethileng e ikemetseng ho bolelele ba maqhubu a leseli kapa boemo ba polarization, athe polarizing plate beamsplitters e etselitsoe ho tšoara linaha tsa S le P ka tsela e fapaneng.
Paralight Optics e fana ka li-plate beamsplitters tse nang le bokaholimo bo koaetsoeng bo khethollang sekhahla sa ho arohana ha borohano ha bokaholimo bo koetsoe 'me AR e koahetsoe e le ho fokotsa litlamorao tsa moea le tšitiso.Li-Beamsplitters tsa Wedged plate li ka etsoa ho etsa likopi tse ngata tse fokolisitsoeng tsa beam e le 'ngoe ea ho kenya.Our 50:50 Nd: YAG laser line plate beamsplitters e fana ka likarolo tse arohaneng tsa 50:50 ho li-wavelengths tse peli tse hlahisoang ke Nd: YAG lasers, 1064 nm le 532 nm.
Likaroloana:
Substrate Material:
RoHS e lumellana, e bonts'a hoo e batlang e se na Laser-Induced Fluorescence
Liaparo:
Beamsplitter Coating on S1 (ka pele holimo) bakeng sa Nd:YAG Laser Wavelengths, Optimised bakeng sa 45 ° AOI;AR Coating e kentsoe ho S2 (ka morao)
Teko ea Koloi ea Tšenyo ea Laser:
Boemo ba Tšenyo e Phahameng
Moralo o Tloaelehileng:
Moralo o Tloaelehileng oa Fumaneha
Litlhaloso Tse Tloaelehileng:
Reference Drawing bakeng sa
Nd:YAG Laser Plate Beamsplitter
Tlhokomeliso: Li-arcmin tse 30 tse katiloeng ka morao holim'a poleiti ea Beamsplitters e fokotsa Ghosting.
Mekhahlelo
Ranges & Tolerances
-
Substrate Material
UV-Grade Fused Silika
-
Mofuta
Nd: YAG laser plate beamsplitter
-
Mamello ea Dimension
+0.00/-0.20 limilimithara
-
Botenya Mamello
+/-0.20 limilimithara
-
Boleng ba Bokaholimo (Scratch-Dig)
E tloaelehileng: 60-40 |Ho nepahala: 40-20
-
Bophahamo ba Bokaholimo (Lehlakore la Plano)
< λ/4 @633 nm ka 25mm
-
Kakaretso ya Tshebetso
Li-tab = 50% ± 5%, Rabs = 50% ± 5%, Li-Tabs + Rabs > 99% (45° AOI)
-
Kamano ea Polarization
|Ts - Tp|<5% & |Rs - Rp|<5% (45° AOI)
-
Mamello ea Angle ea Wedge
30 arcmin ± 10 arcmin
-
Chamfer
Sireletsoa<0.5mm X 45°
-
Ho mamellana karohano (R/T)
± 5% sebakeng se ikhethileng sa polarization
-
Aperture e Hlakileng
90%
-
Ho roala (AOI=45°)
S1: Ho roala ka mokhoa o sa bonahaleng / S2: Ho roala ha AR (Rabs<0.5%)
-
Tšenyo Moetla
> 5 J/cm2, 20ns, 20Hz, @1064nm
Kerafo
♦ Laser line plate beamsplitters haholo-holo bakeng sa ho sebelisoa le Nd: YAG wavelengths (1064 nm le 532 nm);
♦ Merero ke li-curve tsa phetisetso bakeng sa 50: 50 Nd: YAG plate beamsplitters e bontšang hore tshebetso ka kakaretso: Tabs = 50% ± 5% Rabs = 50% ± 5%, Tabs + Rabs> 99% bakeng sa S- kapa P-pol .ho 45° AOI.
50:50 P-Pol.Nd:YAG Laser Plate Beamsplitter @515-532nm at 45° AOI
50:50 S-Pol.Nd:YAG Laser Plate Beamsplitter @1028-1080nm ho 45° AOI
