Non-Polarizing
Cube Beamsplitters

I-Cube beamsplitters yenziwe ngama-prism eengile ezimbini zasekunene ezidityaniswe kunye kwi-hypotenuses, umphezulu we-hypotenuse weprism enye igqunywe.Ukuze ugweme ukonakalisa i-samente, kucetyiswa ukuba ukukhanya kudluliselwe kwi-prism edibeneyo, ehlala ibonisa uphawu lokubhekisela kumhlaba ophantsi oboniswe kumzobo olandelayo.I-Cube beamsplitters ineengenelo ezininzi ngaphezulu kweplate beamsplitters, umzekelo, kulula ukuyinyusa kwaye iphephe imifanekiso yesiporho ngenxa yendawo enye ebonisayo.

I-Paralight Optics inikezela ngee-cube beamsplitters ezikhoyo kwiimodeli ze-polarizing okanye ezingezo-polarizing.I-polarizing cube beamsplitters iya kwahlula ukukhanya kwe-s- kunye ne-p-polarization ithi ngokuhlukileyo ivumela umsebenzisi ukuba afake ukukhanya kwe-polarized kwinkqubo.Ngelixa i-beamsplitters zetyhubhu ezingapholiyo ziyilelwe ukwahlula ukukhanya kwesiganeko ngomlinganiselo ochaziweyo wokwahlulwa ozimeleyo kubude bokukhanya okanye imo yepolarization.Nangona i-beamsplitters engekho-polarization ilawulwa ngokuthe ngqo ukuba ingatshintshi i-S kunye ne-P ye-polarization yokukhanya okungenayo, kunikwe ukukhanya okufakwayo ngokungenamkhethe, kusekho imiphumo ye-polarization, oko kuthetha ukuba kukho umahluko ekuboniseni kunye nokuhanjiswa kwe-S kunye P pol., Kodwa zixhomekeke kuhlobo oluthile beamsplitter.Ukuba imeko yepolarization ayibalulekanga kwisicelo sakho, sicebisa ukuba usebenzise iibeamplitters ezingapholiyo.

Iibeamsplitters ezingenzi polarizing ngokwesiseko zahlula ukukhanya zibe kumlinganiselo othile we-R/T we-10:90, 30:70, 50:50, 70:30, okanye 90:10 ngelixa igcina imo yoqobo yepolarization yokukhanya.Ngokomzekelo, kwimeko ye-50/50 ye-beamsplitter engekho-polarizing, i-P kunye ne-S polarization ethunyelwayo ithi kunye ne-P kunye ne-S polarization ebonakalisiweyo ihlukaniswe kwi-design ratio.Ezi beamsplitters zilungele ukugcina i-polarization kwizicelo zisebenzisa ukukhanya kwe-polarized.IiBeamsplitters zeDichroic zahlula ukukhanya ngokobude bobude.Ukhetho lususela kwizihlanganisi ze-laser beam eyenzelwe i-laser wavelengths ethile ukuya kwi-broadband eshushu kunye nezipili ezibandayo zokwahlula ukukhanya okubonakalayo kunye ne-infrared.I-Dichroic beamsplitters isetyenziswa ngokuqhelekileyo kwizicelo ze-fluorescence.

Iimbonakalo:

Inkqutyana yezinto eziphathekayo:

I-RoHS iyahambelana

Iinketho zokugquma:

Zonke iiCoatings zeDielectric

Iqiniselwe ngu:

NOA61

Iinketho zoyilo:

Uyilo oluSiko luyafumaneka

Iingcaciso eziqhelekileyo:

pro-enxulumene-ico — Umzobo weReferensi ye

Cube Beamsplitter

I-dielectric beamsplitter coating isetyenziswe kwi-hypotenuse enye yeeprism ezimbini, i-AR yokugubungela kuzo zombini igalelo kunye nobuso obuphumayo.

Iiparamitha

Uluhlu kunye noNyamezelo

Uhlobo

Non-polarizing cube beamsplitter
Ukunyamezela koMda

+/-0.20 mm
Umgangatho womphezulu (Scratch-Dig)

60 - 40
Umphezulu oMcaba (icala lePlano)

< λ/4 @ 632.8 nm
Imposiso egqithisiweyo yeWavefront

< λ/4 @ 632.8 nm ngaphaya kokuvula okucacileyo
Ukutenxa kweBeam

Udluliselwe: 0 ° ± 3 arcmin |Ibonakaliswe: 90° ± 3 arcmin
Chamfer

Ikhuselwe< 0.5mm X 45°
Ukwahlula Umlinganiselo (R:T) Ukunyamezela

±5% [T=(Ts+Tp)/2, R=(Rs+Rp)/2]
Umngxuma ocacileyo

> 90%
Ukwaleka (AOI=45°)

Ukwaleka ngokuyinxenye kumboniso womphezulu we-hyphtenuse, i-AR yokwambathisa kuyo yonke iminyango
Umda womonakalo

> 500mJ/cm², 20ns, 20Hz, @1064nm