I-Non-Polarizing
I-Cube Beamsplitters

Ama-cube beamsplitters enziwa ama-prism engela kwesokudla amabili ahlanganiswe ndawonye kuma-hypotenuses, i-hypotenuse surface yeprism eyodwa iboshwe.Ukuze ugweme ukulimaza usimende, kunconywa ukuthi ukukhanya kudluliselwe ku-prism eboshwe, evame ukufaka uphawu lwereferensi endaweni ephansi ekhonjiswe emdwebeni olandelayo wesithenjwa.I-Cube beamsplitters inezinzuzo ezimbalwa ngaphezu kwe-plate beamsplitters, isibonelo kulula ukuyibeka futhi igweme izithombe eziyizipoki ngenxa yendawo eyodwa ebonisayo.

I-Paralight Optics inikeza ama-cube beamsplitters atholakala kumamodeli e-polarizing noma angewona ama-polarizing.I-polarizing cube beamsplitters izohlukanisa ukukhanya kwezimo ze-s- kanye ne-p-polarization ngokuhlukile zivumele umsebenzisi ukuthi engeze ukukhanya kwe-polarized ohlelweni.Nakuba ama-non-polarizing cube beamsplitters adizayinelwe ukuhlukanisa ukukhanya kwesigameko ngesilinganiso esicacisiwe sokuhlukanisa esizimele kubude begagasi bokukhanya noma isimo se-polarization.Ngisho noma ama-beamsplitter angewona ama-polarizing alawulwa ngokuqondile ukuze angashintshi isimo se-S kanye ne-P sokukhanya okungenayo, uma kunikezwe ukukhanya okufakwayo okungahleliwe, kusazoba neminye imiphumela ye-polarization, lokho kusho ukuthi kunomehluko ekuboniseni nasekudluliseleni kwe-S kanye P pol., kodwa zincike ohlotsheni oluthile lwe-beamsplitter.Uma izimo ze-polarization zingabalulekile kuhlelo lwakho lokusebenza, sincoma ukuthi usebenzise ama-beamplitters anga-polarizing.

Ama-beamsplitter angeyona i-polarizing ngokuyisisekelo ahlukanisa ukukhanya abe isilinganiso esithize se-R/T esingu-10:90, 30:70, 50:50, 70:30, noma 90:10 kuyilapho kugcinwa isimo sokwangempela sokukhanya kwesigameko.Isibonelo, esimweni se-50/50 ye-non-polarizing beamsplitter, i-P ne-S polarization edlulisiwe kanye nezimo ezibonisiwe ze-polarization zika-P kanye no-S zihlukaniswa ngesilinganiso sokuklama.Lawa ma-beamsplitter alungele ukugcina i-polarization ezinhlelweni zisebenzisa ukukhanya kwe-polarized.I-Dichroic Beamsplitters ihlukanisa ukukhanya ngobude begagasi.Izinketho zisukela kwizihlanganisi ze-laser beam ezidizayinelwe ubude beza beza be-laser obukhethekile ukuya ezibukweni ezishisayo nezibandayo zokuhlukanisa ukukhanya okubonakalayo ne-infrared.Ama-beamsplitters e-Dichroic avame ukusetshenziswa ekusetshenzisweni kwe-fluorescence.

Izici:

I-Substrate Material:

I-RoHS Iyahambisana

Izinketho zokuhlanganisa:

Wonke ama-Dielectric Coatings

Kuqiniswe ngu:

NOA61

Izinketho zokuklama:

Idizayini Yangokwezifiso Iyatholakala

Imininingwane Ejwayelekile:

pro-ehlobene-ico — Umdwebo Wezithenjwa we

I-Cube Beamsplitter

I-dielectric beamsplitter coating isetshenziswa ku-hypotenuse yeyodwa yamaprism amabili, i-AR coating kubo bobabili ubuso bokufaka nokuphumayo.

Amapharamitha

Amabanga & Ukubekezelelana

Uhlobo

I-Non-polarizing cube beamsplitter
I-Dimension Tolerance

+/-0.20 mm
Ikhwalithi Yobuso (Scratch-Dig)

60-40
I-Surface Flatness (I-Plano Side)

< λ/4 @632.8 nm
Kudluliselwe Iphutha le-Wavefront

< λ/4 @632.8 nm endaweni ecacile
Ukuchezuka kwe-Beam

Kudluliselwe: 0° ± 3 arcmin |Kuyabonakalisiwe: 90° ± 3 arcmin
I-Chamfer

Kuvikelwe< 0.5mm X 45°
I-Split Ratio (R:T) Ukubekezelelana

±5% [T=(Ts+Tp)/2, R=(Rs+Rp)/2]
Imbobo ecacile

> 90%
I-Coating (AOI=45°)

Inamathela ebonakala kancane endaweni ye-hyphtenuse, i-AR enamathela kuyo yonke iminyango
Umonakalo Threshold

> 500mJ/cm², 20ns, 20Hz, @1064nm